Septic tank abandonment is when your current septic tank or drain field fails and needs to be replaced but your local municipality has provided sewer lines to your homes location in between the time it was built and the need to replace it. The plumbing codes will not allow the replacement of septic tank systems where public sewer lines are available. There are several steps to take during a septic tank abandonment. The first would be to contact your local municipality and pay impact fees for using the public sewer system. The second would be having your local municipality locate the tap, a tap is the buried location where you will tie your sewer system to the city. Third would be running a new sewer line from the location of your septic system to the city tap. Once that is complete and you now have working drainage again the existing septic tank will need to be pumped out and cleared of any debris. After the tank is cleared you will need to break up the bottom of the tank so that it will no longer be able to contain waste of any kind. Photos of this process will need to be taken so that your local plumbing inspector can ensure it was done properly. Once that stage has been completed you will then need to fill the existing tank with clean fill dirt to ground level.
That will complete a septic tank abandonment, this is a project that will require a licensed plumbing contractor as permits will be required as well as inspections.
What we work on
- Water heater installation, testing and repairs
- Tankless water heater installation and repairs
- Hybrid water heater installation and repairs
- Leak repair on any plumbing system
- Residential drain cleaning
- Commercial drain cleaning
- Fixture repairs and replacement
- Residential backflow installation and testing
- Commercial backflow installation and testing
- Bathtub and shower pan replacement
- Whole house shutoff valves
- Residential lift stations and pumps
- Laundry valves, hoses and drains
- Slab leaks
- Whole house re-piping
- Kitchen remodel
- Bathroom remodel
- Commercial remodel
- Ice maker lines and boxes
- Whole house drain line replacement
- Sewer mains
- Septic tank abandonments
- Every thing that water touches in your home
Emergency plumbing is any leak or back up that happens without warning. Emergency plumbing is exactly what nobody wants to deal with, but happens every day. Emergency plumbing calls are usually the result of aging plumbing systems. It should be no surprise that you need to update your plumbing if your house is more than 20 years old.
The causes of plumbing system failures are many. Everything from the building settling, to the condition of the water flowing through the lines. Plumbing drainage lines are subject to the same problems, settling can cause bellies in the lines, which in turn leads to clogged plumbing drain lines.
The ability to repair all the minor plumbing leaks and clogged plumbing drains is usually left to licensed plumbers. Some of the smaller repairs can be tackled by homeowners. The repairs can vary greatly in difficulty and due to the damaging nature of water plumbing leaks, most should be completed by licensed plumbers.
The only true way of preventing damage due to plumbing leaks or plumbing backups is to be aware of the age of your plumbing system and take steps such as re-plumbing the water lines before leaks begin. To maintain your drain system you should be aware of the age and materials used. If cast iron drain lines were installed 30 years ago you should know that they deteriorate at the bottom of the plumbing pipe.
A whole house re-pipe is when you replace all of the water lines in the house from the point of entry to every fixture in the house that requires water. Whole house re-pipes require an inspection from the local municipality. The plumbing inspector will check all water lines to ensure everything is in correct working order. The Plumbing inspector will also look at the workmanship of the job to ensure the homeowner is getting a quality job done.
There are several reasons to perform a whole house re-pipe, in the south where homes have no basements the plumbing water lines are run below the concrete slab of the home. When these plumbing lines develop a plumbing leak below the concrete it is called a slab leak. Slab leaks are a common problem that is not easily solvable. The first issue is finding the plumbing leak, there are several ways to find the plumbing leak the most common is by using leak detection equipment to listen through the concrete slab to pinpoint its location. Once the plumbing leak is located you must break open the concrete using a jack hammer to expose the leaking plumbing line. At which time the plumber will repair the leak and re-pour the concrete. While this is an effective method for quickly stopping the plumbing leak it is not a long term solution. The collateral costs associated with this method depending on the location can be quite high. If the leak is below a hardwood floor, under the bathroom or the kitchen cabinets. Many times a whole house re-pipe is not only more cost effective but a true long-term solution to an aging plumbing system.
Water Damage can be caused by Toilet clogging or overflowing, general plumbing problems, washing machine failures and roof leaking. Call a Emergency Water Damage team or a water damage company. Once the water damage professionals arrive at the home or building, they will be able to track down any pockets of excess moisture and remove them. Emergency Water Damage Technicians can locate these pockets of moisture using equipment such as moisture meters and Thermal imaging that measures the moisture in hidden pockets and behind tile and other materials that may not feel wet on the outside. When these moisture pockets are found, the Emergency Water Damage technician’s places drying equipment such as dehumidification and air mover to removing any moisture from drywall or other materials. These Emergency Water Damage technicians are also able to speed up the drying process to prevent the growth of any molds or other harmful bacteria by building drying chambers.
Emergency Flood is when you have to call a water damage company after hours or during regular hours that will respond quickly. Emergency floods happen for a variety of reasons such as a pipe burst, washing machine overflows, clogged toilet or some type of a storm event. One of the other things to do is fine your shut off value to the water this with stop the water flowing as long as it’s from a pipe leak. When this happens to you, you should call a licensed and insured emergency water damage company that offers fast 24 hour 7 days a week 365 days of the year emergency service with a fast response time waiting too long can wreak havoc on your home or business. Also make sure there water damage services have experience, training and equipment to manage an emergency flood, respond quickly to mitigate the damage as well have a Project Manager meet with the Adjuster and manage the restoration project though to its completion.
Home Flood cleanup is when you have standing water in your home, business or commercial company. House Floods happen for variety of reasons such as pipe burst, washing machine overflows or a window leaks, roof leak or clogged toilet over flows. When this happens to you or your business in a matter of minutes it can damage carpet, wood floors, baseboards, walls, ceilings and personal property, water damage occurs quickly and can wreak havoc on your home or business. One of the Main thing Owners should beware is where there shut off valve is for the water to help stop any more damage to your home or business. Ones this is done call a Water Damage Company or Water Remediation company that offers fast 24 hour 7day a week 365 days a year service with a fast response time, Also make their service has experience, training and proper equipment like Dehumidification and air movers to manage a small or large flood and will respond quickly to mitigate the damage and manage the restoration project though to its completion.
Home Water Removal in we there is standing water in your home or place of business and need to be extract by a water damage company. Dry out the affected area. Once extract all the water up. The Water Remediation Company use fans and a dehumidifier to help dry out the area. You want to dry the area out as soon as possible. If you have finished drywall that was affected, you’ll probably have to cut away the areas that were touched by water as the drywall will crumble and the paper backing is a good source of food for mold. If you have baseboard trim, take it up first, and if it’s made from pressboard it will likely not be salvageable. If it was wood, you might be able to save it. Wipe down all areas with a anti-microbial solution.
Emergency water heater repairs are mostly the electrical portions of the Water Heater unit. When your not getting enough hot water it generally indicates a malfunction of one of the water heater components. If the tank itself is leaking, it is time for a new water heater.
It is important to realize that tank type water heaters never stop working. The components such as thermostats and elements are always turning off and on to regulate the temperature in the tank. Aging of the water heater components is normally what causes the water heater failures.
Repairing the water heater should be done by licensed plumbing contractors. It is important to know that most water heaters have 240 volts powering them. This presents significant danger to unqualified technicians. The water heater thermostats and elements can be replaced to restore proper function.
Although it is almost impossible to prevent water heater component failures and eventually water heater tank leaks there is one thing that homeowners can do to optimize the performance. Flushing your water heater will remove unwanted sediment from building up on the bottom. Over the course of several years sediment can build quite thick. This lowers the amount of usable space inside the water heater.
A flooded basement is caused by busted pipes or heavy rain, it’s an enormous inconvenience and hazard. With busted plumbing pipes, shut off the water immediately and repair the plumbing pipes. Remove water damaged furniture and personal items to dry and salvage. Use a water remediation company to extract and place dehumidifier and fans to drain the water and dry out the basement. Remove water damaged sections of wall coverings (drywall, paneling) and insulation, and be sure to dry and ventilate wall cavities to limit mold and mildew growth. Track down the source if it’s not busted pipes. You may need to apply a barrier to the exterior walls to prevent water from leaching through. One of the way to prevent water damage from happening is to shut of all water from the shut off vale.
House Flood is when an unexpected event happens like when a Toilet over flows, washing machine hose burst, supply line to a sink or toilet burst and if a hole forms in the ice maker line. All these items can cause a house flood. If your house floods First thing is too call a emergency water damage remediation team or a water damage company then shut off all water to the house call a plumber to fix the problem. Once the professionals arrive at the home they will start extract all areas that has any signs of moisture. Emergency Water Damage Technicians will remove all contents from water damage areas. Emergency Water Damage team with check all areas with moisture meters and Thermal imaging cameras that measures the moisture in hidden pockets and behind tile and other materials that may not feel wet on the outside. When all areas of moisture are found, the technician’s will place drying equipment such as dehumidification, wall drying units and air mover to removing any moisture from drywall or other materials. These Emergency Water Damage technicians are also able to speed up the drying process to prevent the growth of any microbial or other harmful bacteria by building drying chambers.
Water Damage If left unrepaired, water damage will continue to worsen, leading to greater problems. Learn what you need to know about water-damaged home interiors and how to tackle the situation appropriately. You may need to hire a professional to repair plumbing or roofing. Then you should call Water Remediation Company to dry up any water present, sorting through items, and repairing the water damage. Every situation is different. If the water damage arises from a flood, for instance, it may not saturate the wall. A leaking pipe inside a wall, in contrast, may cause it to rot from the inside out. In that case, you are looking at more extensive repairs. Even in the case of flooding, you must evaluate the type of floodwater and determine how to remove the water. Once the water or moisture is gone and the source is fixed, the damage can be evaluated. Repairing the area then depends on where it’s located and the extent of damage caused.
Home Flood damage is when you have standing water in your home or place of business such as (Condo, Homes, Apartments and Hotel), this can happen for many different responses such as a slap leak, pipe burst, roof leak, and window leaks, heavy rains or maybe a toilet overflows. Home Flood damage can cause a lot of problems to your home or business, not only your personal property it can also cause health problems if not taken care of by a Water Damage company that specializes in flood damage, When Flood Water touches the structure of the Home or Business. Owner should call a professional to remove all standing water or moisture in the Home or Business. Most Water Damage companies offer a 24 hour 7days a week 365 days a year service, proper equipment placement will mitigate the damage to personal property and structure of the Home. The companies Project Manager should meet the owner and adjuster to walk over the project.
Leak detection is the process of finding leaks in your home that is not obvious. There are many different types of leaks so there are several different types of leak detection.
There are many different reasons that leaks happen from the corrosive nature of water and chemicals to the settling of your house. The aging of the plumbing system and its eventual failure leads to a need to find the problem area.
There are two major types of leak detection when it comes to finding water leaks in your home. The first being highly sensitive leak detection listening equipment and the second being a leak detection infrared camera. The leak detection listening equipment allows a trained technician to locate leaks under concrete slabs on pressurized water lines. The plumbing lines can be under your home or around your pool. The second method would be the leak detection infrared camera. This camera allows the user to see differences in temperature. Being that most plumbing leaks are either colder of hotter than the ambient temperature of everything around it water in the wall will show as a different temperature.